• POLYMERS TRADING

Polyethylene

Polyethylene — a thermoplastic ethylene polymer, belongs to the class of polyolefins. This is a mass of white color (transparent and colorless thin sheets). Chemical and cold resistant, dielectric, not sensitive to impact (shock absorber), softens when heated (80—120°C), adhesion (sticking) is extremely low. Widely used for making plastic film, containers (bottles, cans, tanks), sewer pipes, water and gas supply, boats hulls, parts of technical equipment, household items, etc. Low-pressure polyethylene is widely used in landscaping areas and children's playgrounds.

Expandable polystyrene

Polystyrene is a gas-filled material made from polystyrene, its derivatives and from copolymers of styrene. Conventional technology for producing expandable polystyrene is connected with the initial filling of granules of styrene by gas, which dissolves in the polymer mass. Then the steam heats the mass. During this process, the original granules increase in volume multiple times. Polystyrene is most commonly used as heat-insulating and structural material. A considerable amount of Expandable polystyrene is used as a packing and electrical insulating material.

Polystyrene

General-purpose polystyrene is a transparent, hard and brittle material with low mechanical strength. High-impact polystyrene differs from general-purpose polystyrene by high impact strength and less rigidity. Polystyrene is produced from a very wide range of products which are primarily used in  the domestic sphere of human activity (disposable tableware, packaging, toys, etc.). High-impact polystyrene and its modifications have been widely used in the field of household appliances and electronics (frame components of household appliances).

Polypropylene

Polypropylene is produced by polymerization of propylene in combination with metal complex catalysts. Polypropylene may be stabilized, painted and unpainted. Unlike polyethylene, polypropylene is less dense, firmer (high-abrasion), more heat-resistant and almost not exposed to cracking corrosion. Used for the films production (especially packaging), bags, containers, pipes, parts of technical equipment, plastic cups, household goods, nonwovens, insulating material in construction for vibration and sound insulation of intermediate floors in the system «floating floor».

Polyethylene
(LDPE, LLDPE, HDPE)

Expandable
polystyrene (EPS)

Polystyrene
(GPPS, HIPS)

Polypropylene
(PP)

Brand
  • low-density
    polyethylene
    LDPE
  • 15803-020
  • 15303-003
  • 10903-020
  • 10303-003
  • 15803-020
  • 15303-003
  • 15813-020
  • 10803-020
  • 15313-003
  • 15803-020
  • 10803-020
  • 15303-003
  • linear low density
    polyethylene
    LLDPE
  • 118NJ
  • high density
    polyethylene
    HDPE
  • ПЭ2НТ11-285Д
  • 293-285Д
  • ПЭ2НТ22-12
  • ПЭ2НТ76-17
  • HHM TR-144
  • HHM TR-131
  • HHM 5502BN
ManufacturerUse

Low-density polyethylene (LDPE)

Naftan,
Belarus
For obtaining molding products, blown articles and general-purposes films.
Naftan,
Belarus
For manufacture of pressure pipes, fittings, blow molding products, films and film products for general-purpose shrink films, bags.
Naftan,
Belarus
For manufacture of profiled moldings, molding products and blow articles.
Naftan,
Belarus
For manufacture of pressure pipes, fittings, blow molding products, films and film products for general-purpose shrink films, bags.
Tomskneftekhim,
Russia
For obtaining molding products, blown articles and general-purposes films.
Tomskneftekhim,
Russia
For manufacture of pressure pipes, fittings, blow molding products, films and film products for general-purpose shrink films, bags.
Kazanorgsintez,
Russia
For producing bags, pipes, fittings, articles designed for food contact, toys, films, profile-molded products, etc.
Kazanorgsintez,
Russia
For producing bags, pipes, fittings, articles designed for food contact, toys, films, profile-molded products, etc.
Kazanorgsintez,
Russia
For producing bags, pipes, fittings, articles designed for food contact, toys, films, profile-molded products, etc.
Azerikhimiya,
Azerbaijan
For producing bags, pipes, fittings, articles designed for food contact, toys, films, profile-molded products, etc.
Azerikhimiya,
Azerbaijan
For producing bags, pipes, fittings, articles designed for food contact, toys, films, profile-molded products, etc.
Azerikhimiya,
Azerbaijan
For producing bags, pipes, fittings, articles designed for food contact, toys, films, profile-molded products, etc.

Linear low density polyethylene (LLDPE)

Sabic,
Saudi Arabia
Packages for freezing, packaging bags, films for agricultural purposes, coextruded, laminated and shrink films.

High density polyethylene (HDPE)

Kazanorgsintez,
Russia
For manufacture of pipes and fittings, including utility and drinking water supply system, products produced by blow molding.
Kazanorgsintez,
Russia
Compositions are intended for processing by the extrusion method in film used for packaging of cold food products, and for other purposes.
Kazanorgsintez,
Russia
For processing by molding method for household goods and is approved for contact with food.
Kazanorgsintez,
Russia
For products produced by extrusion blow molding.
Chevron Phillips,
USA
Packages t-shirt, packets of "banana" type and garbage bags.
Chevron Phillips,
USA
Packages t-shirt, shopping bags, garbage bags.
Chevron Phillips,
USA
Canisters, tanks, containers for household chemicals, packaging for food, boxes for tools, furniture.

Brand 15803-020

Manufacturer: the plant “Polymir” of JSC “NAFTAN” Belarus

Production form: granules

Packing: plastic bags 25 kg

Storage conditions: In a covered and dry place at temperatures not exceeding 30°C, relative humidity of 80%, excluding the sunlight

Shelf life: 3 years

Transportation: by All modes of transport

Applications: Injection molding, blow molding products and films for General purposes

Specifications

OptionValue
Size of granules, mm2-5
Mass fraction of granules with size from 5 to 8 mm, %, not more0,25
Mass fraction of granules larger than 1 to 2 mm, %, not more0,5
Density0,9190±0,002
The melt flow index (nominal), g/10 min with tolerance in %2,0±25%
The spread of performance melt flow rate within a batch, %, not more±6
The number of inclusions, pcs, not more2
Yield strength tensile, mPa, not less93
Tensile strength at break, mPa, not less113
Elongation at break, %, not less600
Mass fraction of extractable substances, %, not more0,4
Technological test on appearance of filmА or B
The smell and taste of aqueous extracts, points, not higher1

Марка 15303-020

Manufacturer: the plant “Polymir” of JSC “NAFTAN” Belarus

Production form: granules without color, smell and taste. The material is produced by polymerization atilano in tubular and autoclave reactors under a pressure of 1600 – 2100 ATM. with the use of radical initiators

Packing: plastic bags 25 kg

Storage conditions: In a covered and dry place at temperatures not exceeding 30°C, relative humidity of 80%, excluding the sunlight

Shelf life: 3 years

Transportation: by all modes of transport

Applications: Manufacture of pressure pipes, fittings, forming blow molding products, films and film products for general purpose shrink films, bags

Specifications

OptionValue
Size of granules, mm2-5
Mass fraction of granules with size from 5 to 8 mm, %, not more0,25
Mass fraction of granules larger than 1 to 2 mm, %, not more0,5
Mass fraction of granules of another color, %, not morenot allowed
Mass fraction of gray and oxidized granules, %, not morenot allowed
Density0,9205 ± 0,0015
The melt flow index (nominal), g/10 min with tolerance in %0,3 ± 30%
The spread of performance melt flow rate within a batch, %, not more± 16
The number of inclusions, pcs, not more2
Yield strength tensile, mPa, not less98
Tensile strength at break, mPa, not less137
Elongation at break, %, not less600
Resistance to stress cracking, h500
Mass fraction of extractable substances, %, not more0,4
Technological test on appearance of filmА/B
The smell and taste of aqueous extracts, points, not higher1

Марка 10903-020

Manufacturer: the plant “Polymir” of JSC “NAFTAN” Belarus

Production form: granules

Packing: Paper bags invested in plastic bags

Storage conditions: In closed and dry premises, at t not exceeding 25°C, relative humidity 40 - 80%, excluding the sunlight

Shelf life: 3 years

Transportation: by all modes of transport

Applications: Manufacture of profiled moldings, injection molding and blow molding products

Specifications

OptionValue
Size of granules, mm2-5
Mass fraction of granules with size from 5 to 8 mm, %, not more0,25
Mass fraction of granules larger than 1 to 2 mm, %, not more0,5
Mass fraction of granules of another color, %, not morenot allowed
Mass fraction of gray and oxidized granules, %, not morenot allowed
Density0,9185 ± 0,0015
The melt flow index (nominal), g/10 min with tolerance in %2,0 ± 10%
The spread of performance melt flow rate within a batch, %, not more± 5
The number of inclusions, pcs, not more2
Yield strength tensile, mPa, not less85
Tensile strength at break, mPa, not less115
Elongation at break, %, not less500
Resistance to stress cracking, h4
Mass fraction of extractable substances, %, not more0,9
Technological test on appearance of filmB
The smell and taste of aqueous extracts, points, not higher1

Марка 10303-003

Manufacturer: the plant “Polymir” of JSC “NAFTAN” Belarus

Production form: granules

Packing: plastic bags 25 kg

Storage conditions: In closed and dry premises, at t not exceeding 25°C, relative humidity 40 - 80%, excluding the sunlight

Shelf life: 3 years

Transportation: by all modes of transport

Applications: Manufacture of pressure pipes, fittings, blow molding products, films and film products for пeneral purpose shrink films, bags

Specifications

OptionValue
Size of granules, mm2-5
Mass fraction of granules with size from 5 to 8 mm, %, not more0,25
Mass fraction of granules larger than 1 to 2 mm, %, not more0,5
Mass fraction of granules of another color, %, not morenot allowed
Mass fraction of gray and oxidized granules, %, not morenot allowed
Density0,9205 ± 0,0015
The melt flow index (nominal), g/10 min with tolerance in %0,3 ± 15%
The spread of performance melt flow rate within a batch, %, not more± 5
The number of inclusions, pcs, not more2
Yield strength tensile, mPa, not less98
Tensile strength at break, mPa, not less137
Elongation at break, %, not less600
Resistance to stress cracking, h500
Mass fraction of extractable substances, %, not more0,7
Technological test on appearance of filmС
The smell and taste of aqueous extracts, points, not higher1

Марка 15803-020

Manufacturer: LLC “Tomskneftekhim”, Russia

Production form: granules

Packing: plastic bags

Storage conditions: Polyethylene is stored in a closed room excluding exposure to direct sunlight, at a distance not less 1m from heaters. Polyethylene is stored at a temperature not exceeding 25 degrees and a relative humidity of 40-80%

Shelf life: 3 years

Transportation: Railway transport, motor transport

Applications: Molding products, blow molding products and films for general purposes

Specifications

OptionValue
Size of granules, mm2-5
Density0,9190 ± 0,002
The melt flow index (nominal), g/10 min with tolerance in %2,0 ± 25%
The spread of performance melt flow rate within a batch, %, not more± 6
The number of inclusions, pcs, not more2
Mass fraction of gray and oxidized granules, %, not morenot allowed
Mass fraction of granules of another color, %, not morenot allowed
Mass fraction of granules larger than 1 to 2 mm, %, not more0,5
Mass fraction of granules with size from 5 to 8 mm, %, not more0,25
Technological test on appearance of filmА or B
Elongation at break, %, not less600
Yield strength tensile, mPa, not less93
Tensile strength at break, mPa, not less113
Mass fraction of extractable substances, %, not more0,4
The smell and taste of aqueous extracts, points, not higher1

Марка 15303-003

Manufacturer: LLC “Tomskneftekhim”, Russia

Production form: granules

Packing: plastic bags

Storage conditions: Polyethylene is stored in a closed room excluding exposure to direct sunlight, at a distance not less 1m from heaters. Polyethylene is stored at a temperature not exceeding 25°C and relative humidity 40-80%

Shelf life: 3 years

Transportation: Railway transport, motor transport

Applications: Manufacture of pressure pipes, fittings, forming blow molding products, films and film products for general purpose shrink films, bags

Specifications

OptionValue
Size of granules, mm2-5
Density0,9205 ± 0,0015
The melt flow index (nominal), g/10 min with tolerance in %0,3 ± 30%
The spread of performance melt flow rate within a batch, %, not more± 6
The number of inclusions, pcs, not more2
Mass fraction of gray and oxidized granules, %, not morenot allowed
Mass fraction of granules of another color, %, not morenot allowed
Mass fraction of granules larger than 1 to 2 mm, %, not more0,5
Mass fraction of granules with size from 5 to 8 mm, %, not more0,25
Technological test on appearance of filmА or B
Elongation at break, %, not less600
Yield strength tensile, mPa, not less98
Tensile strength at break, mPa, not less137
Mass fraction of extractable substances, %, not more0,4
Resistance to stress cracking, h500
The smell and taste of aqueous extracts, points, not higher1

Марка 15813-020

Manufacturer: JSC “Kazanorgsintez”, Russia

Production form: granules

Packing: plastic bags

Storage conditions: Polyethylene is stored in a closed room excluding exposure to direct sunlight, at a distance not less 1m from heaters. Polyethylene is stored at a temperature not exceeding 25 degrees and a relative humidity of 40-80%

Shelf life: 3 years

Transportation: Railway transport, motor transport

Applications: Manufacture of bags, pipes, fittings, articles designed for food contact, toys, films and film products, profiled moldings, etc

Specifications

OptionValue
Size of granules, mm2-5
Density0,9190 ± 0,002
The melt flow index (nominal), g/10 min with tolerance in %2,0 ± 25%
The spread of performance melt flow rate within a batch, %, not more± 6
The number of inclusions, pcs, not more2
Technological test on appearance of filmА or B
Yield strength tensile, mPa, not less93
Tensile strength at break, mPa, not less113
Elongation at break, %, not less600
Mass fraction of extractable substances, %, not more0,4
The smell and taste of aqueous extracts, points, not higher1
Mass fraction of granules larger than 1 to 2 mm, %, not more0,5
Mass fraction of granules with size from 5 to 8 mm, %, not more0,25
Mass fraction of gray and oxidized granules, %, not morenot allowed
Mass fraction of granules of another color, %, not morenot allowed

Марка 10803-020

Manufacturer: JSC “Kazanorgsintez”, Russia

Production form: granules

Packing: plastic bags

Storage conditions: Polyethylene is stored in a closed room excluding exposure to direct sunlight, at a distance not less 1m from heaters. Polyethylene is stored at a temperature not exceeding 25 degrees and a relative humidity of 40-80%

Shelf life: 3 years

Transportation: Railway transport, motor transport

Applications: Manufacture of bags, pipes, fittings, articles designed for food contact, toys, films and film products, profiled moldings, etc

Specifications

OptionValue
Size of granules, mm2-5
Density0,9185 ± 0,0015
The melt flow index (nominal), g/10 min with tolerance in %2,0 ± 10%
The spread of performance melt flow rate within a batch, %, not more± 5
The number of inclusions, pcs, not more2
Technological test on appearance of filmB
Resistance to stress cracking, h2
Yield strength tensile, mPa, not less93
Tensile strength at break, mPa, not less122
Elongation at break, %, not less550
Mass fraction of extractable substances, %, not more0,9
The smell and taste of aqueous extracts, points, not higher1
Mass fraction of granules larger than 1 to 2 mm, %, not more0,5
Mass fraction of granules with size from 5 to 8 mm, %, not more0,25
Mass fraction of gray and oxidized granules, %, not morenot allowed
Mass fraction of granules of another color, %, not morenot allowed

Марка 15313-003

Manufacturer: JSC “Kazanorgsintez”, Russia

Production form: granules

Packing: plastic bags

Storage conditions: Polyethylene is stored in a closed room excluding exposure to direct sunlight, at a distance not less 1m from heaters. Polyethylene is stored at a temperature not exceeding 25 degrees and a relative humidity of 40-80%

Shelf life: 3 years

Transportation: Railway transport, motor transport

Applications: Manufacture of bags, pipes, fittings, articles designed for food contact, toys, films and film products, profiled moldings, etc

Specifications

OptionValue
Size of granules, mm2-5
Density0,9205 ± 0,0015
The melt flow index (nominal), g/10 min with tolerance in %0,3 ± 30%
The spread of performance melt flow rate within a batch, %, not more± 6
The number of inclusions, pcs, not more2
Technological test on appearance of filmА or B
Resistance to stress cracking, h500
Yield strength tensile, mPa, not less98
Tensile strength at break, mPa, not less137
Elongation at break, %, not less600
Mass fraction of extractable substances, %, not more0,4
The smell and taste of aqueous extracts, points, not higher1
Mass fraction of granules larger than 1 to 2 mm, %, not more0,5
Mass fraction of granules with size from 5 to 8 mm, %, not more0,25
Mass fraction of gray and oxidized granules, %, not morenot allowed
Mass fraction of granules of another color, %, not morenot allowed

Марка 15803-020

Manufacturer: PA "Azerkhimiya", the Plant “Ethylene-Polyethylene”, Azerbaijan

Production form: granules

Packing: plastic bags

Storage conditions: Polyethylene is stored in a closed room excluding exposure to direct sunlight, at a distance not less 1m from heaters. Polyethylene is stored at a temperature not exceeding 25 degrees and a relative humidity of 40-80%

Shelf life: 3 years

Transportation: Railway transport, motor transport

Applications: Production of bags, pipes, fittings, articles designed for food contact, toys, films and film products, profiled moldings, etc

Specifications

OptionValue
Size of granules, mm2-5
Density0,9190 ± 0,002
The melt flow index (nominal), g/10 min with tolerance in %2,0 ± 25%
The spread of performance melt flow rate within a batch, %, not more± 6
The number of inclusions, pcs, not more2
Technological test on appearance of filmА or B
Yield strength tensile, mPa, not less93
Tensile strength at break, mPa, not less113
Elongation at break, %, not less600
Mass fraction of extractable substances, %, not more0,4
The smell and taste of aqueous extracts, points, not higher1
Mass fraction of granules larger than 1 to 2 mm, %, not more0,5
Mass fraction of granules with size from 5 to 8 mm, %, not more0,25
Mass fraction of gray and oxidized granules, %, not morenot allowed
Mass fraction of granules of another color, %, not morenot allowed

Марка 10803-020

Manufacturer: PA "Azerkhimiya", the Plant “Ethylene-Polyethylene”, Azerbaijan

Production form: granules

Packing: plastic bags

Storage conditions: Polyethylene is stored in a closed room excluding exposure to direct sunlight, at a distance not less 1m from heaters. Polyethylene is stored at a temperature not exceeding 25 degrees and a relative humidity of 40-80%

Shelf life: 3 years

Transportation: Railway transport, motor transport

Applications: Manufacture of bags, pipes, fittings, articles designed for food contact, toys, films and film products, profiled moldings, etc

Specifications

OptionValue
Size of granules, mm2-5
Density0,9185 ± 0,0015
The melt flow index (nominal), g/10 min with tolerance in %2,0 ± 10%
The spread of performance melt flow rate within a batch, %, not more± 5
The number of inclusions, pcs, not more2
Technological test on appearance of filmB
Resistance to stress cracking, h2
Yield strength tensile, mPa, not less93
Tensile strength at break, mPa, not less122
Elongation at break, %, not less550
Mass fraction of extractable substances, %, not more0,9
The smell and taste of aqueous extracts, points, not higher1
Mass fraction of granules larger than 1 to 2 mm, %, not more0,5
Mass fraction of granules with size from 5 to 8 mm, %, not more0,25
Mass fraction of gray and oxidized granules, %, not morenot allowed
Mass fraction of granules of another color, %, not morenot allowed

Марка 15303-003

Manufacturer: PA "Azerkhimiya", the Plant “Ethylene-Polyethylene”, Azerbaijan

Production form: granules

Packing: plastic bags

Storage conditions: Polyethylene is stored in a closed room excluding exposure to direct sunlight, at a distance not less 1m from heaters. Polyethylene is stored at a temperature not exceeding 25°C and relative humidity 40-80%

Shelf life: 3 years

Transportation: Railway transport, motor transport

Applications: Manufacture of pressure pipes, fittings, forming blow molding products, films and film products for general purpose shrink films, bags

Specifications

OptionValue
Size of granules, mm2-5
Density0,9205 ± 0,0015
The melt flow index (nominal), g/10 min with tolerance in %0,3 ± 30%
The spread of performance melt flow rate within a batch, %, not more± 6
The number of inclusions, pcs, not more2
Technological test on appearance of filmА or B
Resistance to stress cracking, h500
Yield strength tensile, mPa, not less98
Tensile strength at break, mPa, not less137
Elongation at break, %, not less600
Mass fraction of extractable substances, %, not more0,4
The smell and taste of aqueous extracts, points, not higher1
Mass fraction of granules larger than 1 to 2 mm, %, not more0,5
Mass fraction of granules with size from 5 to 8 mm, %, not more0,25
Mass fraction of gray and oxidized granules, %, not morenot allowed
Mass fraction of granules of another color, %, not morenot allowed

Марка 118NJ

Manufacturer: Sabic, Saudi Arabia

Production form: granules

Packing: 25 kg bags

Storage conditions: In enclosed space preventing from direct sun rays, at a distance of not less than 1 m from heating devices at temperature not exceeding 25°C and a relative humidity of 80%

Shelf life: 3 years from date of manufacture under condition of observance of rules of storage

Transportation: by all types of transport in covered vehicles

Applications: Material is used as raw material for production of films for General purposes. The final product has good stiffness and high resistance to puncture and stretching. Such films are used in the production of freezer bags, packaging bags, films for agricultural purposes, coextruded, laminated and shrink films

Specifications

OptionValue
The fluidity of the melt at 190°C and load of 2.16 kg, g/10 min1,0
The density, g/cm30,918
The threshold of hardness, °C100
Melting °C121
Impact strength, kJ/m22
Tensile strength (MD/TD), kN/m40/120
Puncture resistance j/m630
Ultimate tension (MD/TD), mPa11/11
The ability to relative elongation (MD/TD), %700/850
The modulus of elasticity (MD/TD), mPa160/180
Indicator of turbidity %13,0

Марка ПЭ2НТ11-285Д

Manufacturer: JSC “Kazanorgsintez”, Russia

Production form: granules

Packing: plastic bags

Storage conditions: In closed and dry premises, at t not exceeding 30°C, relative humidity of 80%, excluding the sunlight

Shelf life:

Transportation: By all types of transport in covered vehicles in accordance with goods transportation regulations applied to this type of transport

Applications: composition of polyethylene intended for the manufacture of pipes and fittings, including drinking water, compositions for marking lanes, products produced by blow molding and to produce high-strength thick films with a thickness of 20 µm or more

Specifications

OptionValue
Density, kg/m3, at 23ОС947-950
Density, kg/m3, at 20ОС949-952
The melt flow index at 190ОС and 49Н load (5 kgf), g/10 min5-9
The spread of performance melt flow rate within a batch, %, not more± 10
Yield strength tensile, mPa, not less20
Elongation at break, %, not less600
Mass fraction of volatiles, %, not more350
The thermal stability at 200ОС, min, not less20
Resistance at constant internal pressure at 80°C, with initial tension in the pipe wall 4.0 mPa, (on pipe d110 SDR 11), h, not less165
Resistance at constant internal pressure at 80°C, with initial tension in the pipe wall of 2.8 MPa (piping d110 SDR 11), h, not less1000
Resistance at constant internal pressure at 20°C on pipe d32 mm SDR 11 with initial stress is 12.4 mPa, h, not less100
Resistance at constant internal pressure at 20°C on pipe d32 mm SDR 11 with initial stress of 11.6 MPa, h, not less2500

Марка 293-285Д

Manufacturer: JSC “Kazanorgsintez”, Russia

Production form: granules

Packing: plastic bags

Storage conditions: In closed and dry premises, at t not exceeding 30°C, relative humidity of 80%, excluding the sunlight

Shelf life:

Transportation: By all types of transport in covered vehicles in accordance with goods transportation regulations applied to this type of transport

Applications: composition is intended for processing by the method of extrusion in film used for packaging cold food products, and for other purposes

Specifications

OptionValue
Density, r/cm3 at 20ОС0,943-0,949
The melt flow index at a load of 5 kgf, g/10 min0,4-0,7
The spread of performance melt flow rate within a batch, %, not more± 10
The number of inclusions, pcs, not more3
Mass fraction of ash, %, not more0,06
Mass fraction of volatiles, %, not more0,09
Yield strength tensile, mPa, not less17
Tensile strength at break, mPa, not less20,6
Elongation at break, %, not less700
Mass fraction of granules smaller than 2 mm, %, not more1
Mass fraction of granules with size from 5 to 8 mm, %, not more1

Марка ПЭ2НТ22-12

Manufacturer: JSC “Kazanorgsintez”, Russia

Production form: granules

Packing: plastic bags

Storage conditions: In closed and dry premises, at t not exceeding 30°C, relative humidity of 80%, excluding the sunlight

Shelf life:

Transportation: By all types of transport in covered vehicles in accordance with goods transportation regulations applied to this type of transport

Applications: polyethylene brand ПЭ2НТ22-12 is designed for processing of molded products and household goods and is approved for contact with food

Specifications

OptionValue
Density, kg/m3, at 23ОС958-965
Density, kg/m3, at 20ОС960-966
The melt flow index at 190ОС and 49Н load (5 kgf), g/10 min6-9
The spread of performance melt flow rate within a batch, %, not more± 15
The number of inclusions, pcs, not more10
Relation ПТР21,6/ПТР2,1620-35
Yield strength tensile, mPa, not less28
Tensile strength at break, mPa, not less17
The smell of the aqueous extract, the score is not higher1
Taste of water extract, the score is not highernot allowed
Mass fraction of granules smaller than 2 mm, %, not more1
Mass fraction of granules with size from 5 to 8 mm, %, not more1

Марка ПЭ2НТ76-17

Manufacturer: JSC “Kazanorgsintez”, Russia

Production form: granules

Packing: plastic bags

Storage conditions: In closed and dry premises, at t not exceeding 30°C, relative humidity of 80%, excluding the sunlight

Shelf life:

Transportation: By all types of transport in covered vehicles in accordance with goods transportation regulations applied to this type of transport

Applications: Products produced by extrusion blow molding

Specifications

OptionValue
Density, kg/m3, at 23ОС955-961
Density, kg/m3, at 20ОС957-963
The melt flow index at 190ОС and 49Н load (5 kgf), g/10 min2,3-3,3
The spread of performance melt flow rate within a batch, %, not more± 10
The number of inclusions, pcs, not more5
Mass fraction of ash, %, not more0,03
Mass fraction of volatiles, %, not more0,09
Yield strength tensile, mPa, not less26
Tensile strength at break, mPa, not less30
Elongation at break, %, not less750
Resistance to untracking, h, not less30

Марка HHM TR-144

Manufacturer: Chevron Phillips Chemical Company LP, USA

Production form: granules

Packing: plastic bags

Storage conditions: In closed and dry premises, at t not exceeding 30°C, relative humidity of 80%, excluding the sunlight

Shelf life:

Transportation: By all types of transport in covered vehicles in accordance with goods transportation regulations applied to this type of transport

Applications: t-shirt, packets of type "banana" and garbage bags

Specifications

OptionValue
Density, g/cm³0,946
The melt flow index, 190°C/2.16 kg, g/10 min0,18
The melt flow index, 190°C/21.6 kg g/10 min15
The modulus of elasticity in tension, MPa1150
Brittleness temperature, °C˂ 75
The main properties of the film (0.025 mm):
The rupture test, g90
Impact strength, j0,35
The yield strength in tension, 50 mm/min MD MPa24
The yield strength in tension, 50 mm/min TD, MPa26
Elongation at break, 50 mm/min MD %480
Elongation at break, 50 mm/min TD % 640
Tensile strength MD, g19
Tensile strength TD, g270

Марка HHM TR-131

Manufacturer: Chevron Phillips Chemical Company LP, USA

Production form: granules

Packing: plastic bags

Storage conditions: In closed and dry premises, at t not exceeding 30°C, relative humidity of 80%, excluding the sunlight

Shelf life:

Transportation: By all types of transport in covered vehicles in accordance with goods transportation regulations applied to this type of transport

Applications: t-shirt, shopping bags, garbage bags

Specifications

OptionValue
Density, g/cm³0,938
The melt flow index, 190°C/2.16 kg, g/10 min0,2
The melt flow index, 190°C/21.6 kg g/10 min15
The modulus of elasticity in tension, MPa760
Brittleness temperature, °C˂ 75
The main properties of the film (0.025 mm):
The rupture test, g165
Impact strength, j0,35
The yield strength in tension, 50 mm/min MD MPa21
The yield strength in tension, 50 mm/min TD, MPa23
Elongation at break, 50 mm/min MD %500
Elongation at break, 50 mm/min TD % 660
Tensile strength MD, g30
Tensile strength TD, g350

Марка HHM 5502BN

Manufacturer: Chevron Phillips Chemical Company LP, USA

Production form: granules

Packing: plastic bags

Storage conditions: In closed and dry premises, at t not exceeding 30°C, relative humidity of 80%, excluding the sunlight

Shelf life:

Transportation: By all types of transport in covered vehicles in accordance with goods transportation regulations applied to this type of transport

Applications: Cans, pots, containers for household chemicals, packaging for food, boxes for tools, furniture

Specifications

OptionValue
Density, g/cm³0,955
The melt flow index, 190°C/2.16 kg, g/10 min0,35
The yield strength in tension, 50 mm/min, type IV, MPa27
The modulus of elasticity in tension, MPa1370
Brittleness temperature, °C˂ 75
Brand
  • expanded
    polystyrene
    EPS
  • F-MS
  • F-SA
  • F-SB
  • F-S
  • B-S
  • F-301
  • F-302
  • F-303
  • Alphapor 201
  • Alphapor 301
  • Alphapor 401
  • Alphapor 501
  • 100F
  • 150F
  • 200F
  • 200FL
  • 300F
ManufacturerUse

Expandable polystyrene (EPS)

Astor Group Ltd,
China
Insulating panels of low density
Astor Group Ltd,
China
Insulating panels of medium and low density
Astor Group Ltd,
China
Insulating panels of medium and low density
Astor Group Ltd,
China
Insulating panels of high density, decorative elements, packaging elements, thermal, structural and building products.
Astor Group Ltd,
China
Packing of home appliances, thermoboxes
Jiangsu Leasty
Chemical, China
Insulating panels of low density
Jiangsu Leasty
Chemical, China
Insulating panels of medium and low density
Jiangsu Leasty
Chemical, China
Insulating panels of medium and low density
Sibur-Khimprom,
Russia
Insulating panels of medium and low density
Sibur-Khimprom,
Russia
Insulating panels of medium and low density
Sibur-Khimprom,
Russia
Insulating panels of medium density. Packing items, thermo containers, construction and building products.
Sibur-Khimprom,
Russia
Insulating panels of medium and high density, decorative items, and packaging, thermal, structural and building products.
Ravago Petrokemiya,
Luxembourg
Insulating panels of high density, decorative elements, packaging elements, thermal, structural and building products.
Ravago Petrokemiya,
Luxembourg
Insulating panels of high density
Ravago Petrokemiya,
Luxembourg
Insulating panels of medium and low density
Ravago Petrokemiya,
Luxembourg
Insulating panels of medium and low density
Ravago Petrokemiya,
Luxembourg
Insulating panels of low density

Марка F-MS

Manufacturer: Astor Group Ltd

Production form: granules

Packing: bags 25 kg

Storage conditions: In closed ventilated dry storage facilities at a temperature not exceeding 25°C away from sources of fire

Shelf life: 6 months from date of manufacture under condition of observance of rules of storage

Transportation: by all modes of transport

Applications: Heat and sound insulation plate of low density

Specifications

OptionValue
The content of pentane, %4-8
Size of granules, mm1,2-1,8
Density, g/l13-17

Марка F-SA

Manufacturer: Astor Group Ltd

Production form: granules

Packing: bags 25 kg

Storage conditions: In closed ventilated dry storage facilities at a temperature not exceeding 25°C away from sources of fire

Shelf life: 6 months from date of manufacture under condition of observance of rules of storage

Transportation: by all modes of transport

Applications: Heat and sound insulation plate of low and medium density

Specifications

OptionValue
The content of pentane, %4-8
Size of granules, mm0,9-1,4
Density, g/l15-20

Марка F-SB

Manufacturer: Astor Group Ltd

Production form: granules

Packing: bags 25 kg

Storage conditions: In closed ventilated dry storage facilities at a temperature not exceeding 25°C away from sources of fire

Shelf life: 6 months from date of manufacture under condition of observance of rules of storage

Transportation: by all modes of transport

Applications: thermal insulation plate medium and low density

Specifications

OptionValue
The content of pentane, %4-8
Size of granules, mm0.7-1.1
Density, g/l18-25

Марка F-S

Manufacturer: Astor Group Ltd

Production form: granules

Packing: bags 25 kg

Storage conditions: In closed ventilated dry storage facilities at a temperature not exceeding 25°C away from sources of fire

Shelf life: 6 months from date of manufacture under condition of observance of rules of storage

Transportation: by all modes of transport

Applications: thermal insulation slabs high density, decorative elements, packaging elements, thermal, structural and building products

Specifications

OptionValue
The content of pentane, %4-8
Size of granules, mm0.5-0.9
Density, g/l25-35

Марка B-S

Manufacturer: Astor Group Ltd

Production form: granules

Packing: bags 25 kg

Storage conditions: In closed ventilated dry storage facilities at a temperature not exceeding 25°C away from sources of fire

Shelf life: 6 months from date of manufacture under condition of observance of rules of storage

Transportation: by all modes of transport

Applications: Packing of home appliances, thermoboxes

Specifications

OptionValue
The content of pentane, %4-8
Size of granules, mm0.5-0.9
Density, g/l20-30

Марка F-301

Manufacturer: Jiangsu Leasty Chemical

Production form: granules

Packing: bags 25 kg

Storage conditions: In closed ventilated dry storage facilities at a temperature not exceeding 25°C away from sources of fire

Shelf life: 6 months from date of manufacture under condition of observance of rules of storage

Transportation: by all modes of transport

Applications: Heat and sound insulation plate of low density

Specifications

OptionValue
The content of pentane, %4-8
Size of granules, mm1.0-1.6
Pre-expansion, times70-85
Density, g/l12-14

Марка F-302

Manufacturer: Jiangsu Leasty Chemical

Production form: granules

Packing: bags 25 kg

Storage conditions: In closed ventilated dry storage facilities at a temperature not exceeding 25°C away from sources of fire

Shelf life: 6 months from date of manufacture under condition of observance of rules of storage

Transportation: by all modes of transport

Applications: Heat and sound insulation plate of low and medium density

Specifications

OptionValue
The content of pentane, %4-8
Size of granules, mm0.8-1.2
Pre-expansion, times60-70
Density, g/l14-16

Марка F-303

Manufacturer: Jiangsu Leasty Chemical

Production form: granules

Packing: bags 25 kg

Storage conditions: In closed ventilated dry storage facilities at a temperature not exceeding 25°C away from sources of fire

Shelf life: 6 months from date of manufacture under condition of observance of rules of storage

Transportation: by all modes of transport

Applications: thermal insulation plate medium and low density

Specifications

OptionValue
The content of pentane, %4-8
Size of granules, mm0.6-0.9
Pre-expansion, times50-65
Density, g/l15-18

Марка Alphapor 201

Manufacturer: SIBUR-Khimprom

Production form: granules

Packing: bags 25 kg, big-beg 800 kg

Storage conditions: expandable polystyrene is stored in closed ventilated dry storage facilities at temperatures not exceeding 25°C, which prohibited inclusion of heating devices. The packaging should not be exposed to direct sunlight

Shelf life: guaranteed shelf life of the polymer from the date of manufacture by the manufacturer in a sealed and unopened packaging at a temperature not exceeding 15°C is 6 months

Transportation: by all types of transport in covered vehicles in accordance with the rules of transportation of dangerous goods, operating on this mode of transport. Railway transportation is carried out in carload shipments

Applications: Heat and sound insulation plate of low and medium density

Specifications

OptionValue
Size of granules, mm1,4-2,2
Mass fraction of particles of the main fraction, %, not less98
Mass fraction of pentane, %5,5 – 6.5
Mass fraction of water, %, not more0,4
Mass fraction of residual monomer, %, not more0,1
Molecular weight150000-250000
Apparent density, kg/m38-14
Fire ResistanceB2
The destructive voltage in static bending,with a density of 15kg/m3, MPa, not less0.1
Coefficient of thermal conductivity, W/m*K0,035-0,046

Марка Alphapor 301

Manufacturer: SIBUR-Khimprom

Production form: granules

Packing: bags 25 kg, big-beg 800 kg

Storage conditions: expandable polystyrene is stored in closed ventilated dry storage facilities at temperatures not exceeding 25°C, which prohibited inclusion of heating devices. The packaging should not be exposed to direct sunlight

Shelf life: guaranteed shelf life of the polymer from the date of manufacture by the manufacturer in a sealed and unopened packaging at a temperature not exceeding 15°C is 6 months

Transportation: by all types of transport in covered vehicles in accordance with the rules of transportation of dangerous goods, operating on this mode of transport. Railway transportation is carried out in carload shipments

Applications: Heat and sound insulation plate of low and medium density

Specifications

OptionValue
Size of granules, mm1,0-1,6
Mass fraction of particles of the main fraction, %, not less98
Mass fraction of pentane, %5,0 – 7.0
Mass fraction of water, %, not more1
Mass fraction of residual monomer, %, not more0,1
Molecular weight150000-250000
Apparent density, kg/m314-20
Fire ResistanceB2
The destructive voltage in static bending,with a density of 15kg/m3, MPa, not less0.1
The destructive voltage in static bending,with a density of 20kg/m3, MPa, not less 0.17
Coefficient of thermal conductivity, W/m*K0,035-0,046

Марка Alphapor 401

Manufacturer: SIBUR-Khimprom

Production form: granules

Packing: bags 25 kg, big-beg 800 kg

Storage conditions: expandable polystyrene is stored in closed ventilated dry storage facilities at temperatures not exceeding 25°C, which prohibited inclusion of heating devices. The packaging should not be exposed to direct sunlight

Shelf life: guaranteed shelf life of the polymer from the date of manufacture by the manufacturer in a sealed and unopened packaging at a temperature not exceeding 15°C is 6 months

Transportation: by all types of transport in covered vehicles in accordance with the rules of transportation of dangerous goods, operating on this mode of transport. Railway transportation is carried out in carload shipments

Applications: thermal insulation plate medium density. Packing items, thermo containers, construction and building products

Specifications

OptionValue
Size of granules, mm0,7-1,0
Mass fraction of particles of the main fraction, %, not less98
Mass fraction of pentane, %5,5 – 6.5
Mass fraction of water, %, not more0.4
Mass fraction of residual monomer, %, not more0,1
Molecular weight150000-250000
Apparent density, kg/m315-25
Fire ResistanceB2
The destructive voltage in static bending,with a density of 15kg/m3, MPa, not less0.1
The destructive voltage in static bending,with a density of 20kg/m3, MPa, not less0.17
The destructive voltage in static bending,with a density of 25kg/m3, MPa, not less0.23
Coefficient of thermal conductivity, W/m*K0,035-0,046

Марка Alphapor 501

Manufacturer: SIBUR-Khimprom

Production form: granules

Packing: bags 25 kg, big-beg 800 kg

Storage conditions: expandable polystyrene is stored in closed ventilated dry storage facilities at temperatures not exceeding 25°C, which prohibited inclusion of heating devices. The packaging should not be exposed to direct sunlight

Shelf life: guaranteed shelf life of the polymer from the date of manufacture by the manufacturer in a sealed and unopened packaging at a temperature not exceeding 15°C is 6 months

Transportation: by all types of transport in covered vehicles in accordance with the rules of transportation of dangerous goods, operating on this mode of transport. Railway transportation is carried out in carload shipments

Applications: thermal insulation plates of medium and high density, decorative elements, packaging elements, thermal, structural and building products

Specifications

OptionValue
Size of granules, mm0,45-0,7
Mass fraction of particles of the main fraction, %, not less98
Mass fraction of pentane, %5,0 – 7,0
Mass fraction of water, %, not more0.4
Mass fraction of residual monomer, %, not more0,1
Molecular weight150000-250000
Apparent density, kg/m322-40
Fire ResistanceB2
The destructive voltage in static bending,with a density of 25kg/m3, MPa, not less0.23
The destructive voltage in static bending,with a density of 30kg/m3, MPa, not less0.31
Coefficient of thermal conductivity, W/m*K0,035-0,046

Марка 100F

Manufacturer: Ravago Petrokemiya

Production form: granules

Packing: big bag 1100 kg or 1125 kg

Storage conditions: In closed ventilated dry storage facilities at a temperature not exceeding 25°C away from sources of fire

Shelf life: 6 months from date of manufacture under condition of observance of rules of storage

Transportation: by all modes of transport

Applications: thermal insulation slabs high density, decorative elements, packaging elements, thermal, structural and building products

Specifications

OptionValue
Size of granules, mm0,4 – 0,7
Density, g/l22-35

Марка 150F

Manufacturer: Ravago Petrokemiya

Production form: granules

Packing: big bag 1100 kg or 1125 kg

Storage conditions: In closed ventilated dry storage facilities at a temperature not exceeding 25°C away from sources of fire

Shelf life: 6 months from date of manufacture under condition of observance of rules of storage

Transportation: by all modes of transport

Applications: thermal insulation plate high density

Specifications

OptionValue
Size of granules, mm0,7 – 0,9
Density, g/l16-24

Марка 200F

Manufacturer: Ravago Petrokemiya

Production form: granules

Packing: big bag 1100 kg or 1125 kg

Storage conditions: In closed ventilated dry storage facilities at a temperature not exceeding 25°C away from sources of fire

Shelf life: 6 months from date of manufacture under condition of observance of rules of storage

Transportation: by all modes of transport

Applications: Heat and sound insulation plate of low and medium density

Specifications

OptionValue
Size of granules, mm0,9 – 1,25
Density, g/l15-22

Марка 200FL

Manufacturer: Ravago Petrokemiya

Production form: granules

Packing: big bag 1100 kg or 1125 kg

Storage conditions: In closed ventilated dry storage facilities at a temperature not exceeding 25°C away from sources of fire

Shelf life: 6 months from date of manufacture under condition of observance of rules of storage

Transportation: by all modes of transport

Applications: Heat and sound insulation plate of low and medium density

Specifications

OptionValue
Size of granules, mm0,9 – 1,25
Density, g/l10-14

Марка 300F

Manufacturer: Ravago Petrokemiya

Production form: granules

Packing: big bag 1100 kg or 1125 kg

Storage conditions: In closed ventilated dry storage facilities at a temperature not exceeding 25°C away from sources of fire

Shelf life: 6 months from date of manufacture under condition of observance of rules of storage

Transportation: by all modes of transport

Applications: Heat and sound insulation plate of low density

Specifications

OptionValue
Size of granules, mm1,25 – 2,50
Density, g/l10
Brand
  • general-purpose
    polystyrene
    GPPS
  • MC3500
  • MC3100
  • 1540
  • 1160
  • high-impact
    polysterene
    HIPS
  • MA5210
  • EA6025
  • 7240
  • recycled
    GPPS
  • transparent crushed
  • crushed white
  • regranulate
ManufacturerUse

General-purpose polystyrene (GPPS)

Astor Group Ltd,
China
Boxes for CDs, consumer plastic products, boxes for cosmetics
Astor Group Ltd,
China
Transparent packaging boxes, foam sheets, decorative blocks and toys
Tabriz Petrochemical, IranPetri cups, pens, parts of refrigerators, coextrusion of the glossy layer. Anionic solvent styrene-butadiene-styrene copolymer.
Tabriz Petrochemical, IranShowers, sheets of lighting, thin films, foamed sheets, fruit trays, meat trays, packaging for eggs.

High-impact polysterene (HIPS)

Astor Group Ltd,
China
Components and parts for TV sets, air conditioners, refrigerators, computers, household goods
Astor Group Ltd,
China
Disposable tableware, household appliances and goods applications
Tabriz Petrochemical, IranCups, plates, cartons for eggs, general packaging, coextrusion with GPPS for food packaging

recycled GPPS

EuropeMoulding and extrusion goods production (including expanded)
EuropeMoulding and extrusion goods production (including expanded)
EuropeMoulding and extrusion goods production (including expanded)

Марка MC3500

Manufacturer: Astor Group Ltd

Production form: granules

Packing: paper, polybags

Storage conditions: Indoors on shelves or pallets, separated from the floor by not less than 5 cm from heating appliances of not less than 1 m, without exposure to direct sunlight

Shelf life:

Transportation: by all types of transport in covered vehicles

Applications: Boxes for CDs, consumer plastic products, cartons for cosmetics

Specifications

OptionValue
Density, g/cm³1.04
The melt flow index, 200°C/5 kg g/10 min9
Strength according to Izod (1/8in), j/m10
Strength according to Izod (1/4in), j/m13
Tensile strength, MPa49
Burst strength, MPa49
Elongation to break, %4.5
The modulus of elasticity in tension, MPa2900
The modulus of elasticity in bending, MPa2900
Softening temperature by Vika (50°C/h, 1 kg), °C100
Flammability (UL94)HB

Марка MC3100

Manufacturer: Astor Group Ltd

Production form: granules

Packing: paper, polybags

Storage conditions: Indoors on shelves or pallets, separated from the floor by not less than 5 cm from heating appliances of not less than 1 m, without exposure to direct sunlight

Shelf life:

Transportation: by all types of transport in covered vehicles

Applications: Transparent packaging boxes, foam sheets, decorative blocks and toys

Specifications

OptionValue
Density, g/cm³1.04
The melt flow index, 200°C/5 kg g/10 min3
Strength according to Izod (1/8in), j/m19
Strength according to Izod (1/4in), j/m14
Tensile strength, MPa54
Burst strength, MPa54
Elongation to break, %4.5
The modulus of elasticity in tension, MPa3381
The modulus of elasticity in bending, MPa3105
Softening temperature by Vika (50°C/h, 1 kg), °C108
Flammability (UL94)HB

Марка 1540

Manufacturer: Tabriz Petrochemical

Production form: granules

Packing: paper, polybags

Storage conditions: Indoors on shelves or pallets, separated from the floor by not less than 5 cm from heating appliances of not less than 1 m, without exposure to direct sunlight

Shelf life:

Transportation: by all modes of transport in covered vehicles. Product packed in soft containers can be transported in open rolling stock

Applications: Petri dishes, pens, parts of refrigerators, coextrusion of the glossy layer. Anionic solvent styrene-butadiene-styrene copolymer

Specifications

OptionValue
The melt flow index, 200°C/5 kg g/10 min11
Residual monomer, ppm< 500
Softening temperature by Vika (50°C/h, 1 kg), °C91
Rockwell hardnessScale/L70
Burst strength, MPa42
Elongation to break, %2
The modulus of elasticity in tension, MPa3100

Марка 1160

Manufacturer: Tabriz Petrochemical

Production form: granules

Packing: paper, polybags

Storage conditions: Indoors on shelves or pallets, separated from the floor by not less than 5 cm from heating appliances of not less than 1 m, without exposure to direct sunlight

Shelf life:

Transportation: by all modes of transport in covered vehicles. Product packed in soft containers can be transported in open rolling stock

Applications: Showers, sheets of lighting, thin films, foamed sheets, fruit trays, meat trays, packaging for eggs

Specifications

OptionValue
The melt flow index, 200°C/5 kg g/10 min2.5
Residual monomer, ppm< 500
Softening temperature by Vika (50°C/h, 1 kg), °C105
Rockwell hardnessScale/L70
Burst strength, MPa48
Elongation to break, %3
The modulus of elasticity in tension, MPa3200

Марка MA5210

Manufacturer: Astor Group Ltd

Production form: granules

Packing: paper, polybags

Storage conditions: Indoors on shelves or pallets, separated from the floor by not less than 5 cm from heating appliances of not less than 1 m, without exposure to direct sunlight

Shelf life:

Transportation: by all types of transport in covered vehicles

Applications: Components and parts for TV sets, air conditioners, refrigerators, computers, household goods

Specifications

OptionValue
Density, g/cm³1.03
The melt flow index, 200°C/5 kg g/10 min4
Strength according to Izod (1/8in), j/m120
Strength according to Izod (1/4in), j/m98
Tensile strength, MPa32
Burst strength, MPa28
Elongation to break, %50
The modulus of elasticity in tension, MPa2277
The modulus of elasticity in bending, MPa2277
Softening temperature by Vika (50°C/h, 1 kg), °C103
Flammability (UL94)HB

Марка EA6025

Manufacturer: Astor Group Ltd

Production form: granules

Packing: paper, polybags

Storage conditions: Indoors on shelves or pallets, separated from the floor by not less than 5 cm from heating appliances of not less than 1 m, without exposure to direct sunlight

Shelf life:

Transportation: by all types of transport in covered vehicles

Applications: Disposable tableware, household appliances and goods applications

Specifications

OptionValue
Density, g/cm³1.03
The melt flow index, 200°C/5 kg g/10 min4
Strength according to Izod (1/8in), j/m100
Strength according to Izod (1/4in), j/m87
Tensile strength, MPa30
Burst strength, MPa28
Elongation to break, %65
The modulus of elasticity in tension, MPa2100
The modulus of elasticity in bending, MPa2100
Softening temperature by Vika (50°C/h, 1 kg), °C103
Flammability (UL94)HB

Марка 7240

Manufacturer: Tabriz Petrochemical

Production form: granules

Packing: paper, plastic or polypropylene bags

Storage conditions: Indoors on shelves or pallets, separated from the floor by not less than 5 cm from heating appliances of not less than 1 m, without exposure to direct sunlight

Shelf life:

Transportation: by all modes of transport in covered vehicles. Product packed in soft containers can be transported in open rolling stock

Applications: Cups, plates, cartons for eggs, General packaging, coextrusion with GPPS for food packaging

Specifications

OptionValue
The melt flow index, 200°C/5 kg g/10 min4,5
Residual monomer, ppm< 500
Softening temperature by Vika (50°C/h, 1 kg), °C97
Rockwell hardnessScale/R65
Tensile strength, MPa23
Burst strength, MPa21
Elongation to break, %60
The modulus of elasticity in tension, MPa1950
Strength according to Izod, kj/m211

Recycled crushed transparent

Manufacturer: Europe

Production form: granules

Packing: paper, polybags

Storage conditions: Indoors on shelves or pallets, separated from the floor by not less than 5 cm from heating appliances of not less than 1 m, without exposure to direct sunlight

Shelf life:

Transportation: by all types of transport in covered vehicles

Applications: Moulding and extrusion goods production (including expanded)

Recycled crushed white

Manufacturer: Europe

Production form: granules

Packing: paper, polybags

Storage conditions: Indoors on shelves or pallets, separated from the floor by not less than 5 cm from heating appliances of not less than 1 m, without exposure to direct sunlight

Shelf life:

Transportation: by all types of transport in covered vehicles

Applications: Moulding and extrusion goods production (including expanded)

Recycled regranulat

Manufacturer: Europe

Production form: granules

Packing: paper, polybags

Storage conditions: Indoors on shelves or pallets, separated from the floor by not less than 5 cm from heating appliances of not less than 1 m, without exposure to direct sunlight

Shelf life:

Transportation: by all types of transport in covered vehicles

Applications: Moulding and extrusion goods production (including expanded)

Brand
  • polypropylene
    PP
  • HGX-030 SP
ManufacturerUse

Polypropylene (PP)

Chevron Phillips,
USA
Production of fabrics and bags, cordage and ropes, and also for the carpet base

Марка HGX-030 SP

Manufacturer: Chevron Phillips Chemical Company LP, USA

Production form: granules

Packing: plastic bags

Storage conditions: In closed and dry premises, at t not exceeding 30°C, relative humidity of 80%, excluding the sunlight

Shelf life:

Transportation: By all types of transport in covered vehicles in accordance with goods transportation regulations applied to this type of transport

Applications: Production of fabrics and bags, cordage and ropes, and also for the carpet base

Specifications

OptionValue
Density, g/cm³0,906
The melt flow index, 230°C/2.16 kg, g/10 min3
Yield strength tensile, 50 mm/min MPa37
The modulus of elasticity secant, 1.3 mm/min, MPa1590
Impact strength according to Izod at 23°C, j/m31
Shore hardness, D type70
Temp. of deflection under load @ 0.46 MPa, °C101